American Dynamics EDVR Guia de preparacion descargar pdf (Pagina 6)

EDVR Quick Setup Guide

8200-0841-00 A0 5

H. Connecting ADTT16E to EDVR

1 Connect the hardware. Refer to the following diagram:

2 Configure the Touch Tracker (Config Devices). Set Configure Devices to MUX 16 Duplex or

Triplex.

Note

Do not use MUX 16 posem.

3 To configure the COM port, press the MENU button. Select Advanced Settings >

Communication > RS232 Settings using the arrow buttons or jog dial and pressing the ENTER

button. Set Baud Rate to 9600 using the shuttle ring and then press the ENTER button. Keep

pressing the MENU button to return to the Main Menu.

4 To configure dome settings, press the MENU button. Select > Advanced Settings > Dome

Settings using the arrow buttons or jog dial and pressing the ENTER button.. Highlight the

camera, set the ID (integer 1-254) using the shuttle ring. Move to the protocol column and

select the protocol using the shuttle ring. Press the ENTER button (AD422 only). Keep

pressing the MENU button to return to the Main Menu.

DOME

EDVR

Power

Sensornet

RS232

9600 Baud

RS232 over

Cat 5 Cable

Set Configure Deivces to

MUX 16 Duplex/Triplex

Note: Do not use MUX 16 posem

EIM

BNC Video

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

American Dynamics EDVR Guia de preparacion Pagina 6