
Using the VideoEdge IP Encoder with Intellex IP
_______________________________________________________________________
3
8200-0806-11 B0
• Motion Sensitivity: High, Normal
The VideoEdge IP Encoder is capable of capturing, compressing, and
transmitting 30 ips per video input at the highest resolution and quality settings
for low to moderate levels of motion on each camera for a total of 120 ips. As the
motion becomes more severe, the load on the DSP increases until the maximum
image rate begins to drop off at the highest resolution and quality settings. An
example of high motion would be panning cameras on some or all of the video
inputs.
When the image resolution is 2CIF or less the image rate is 120 ips regardless of
the quality settings or the amount of motion. Where ever possible it is important
to mix the fixed cameras and domes between the encoders so that no more than
three cameras on a single encoder can be panning at any one time.
Each Video Edge IP encoder can support multiple connections, so that a user
can record data on Intellex IP, while using a browser for live viewing. Remember
that each connection adds to the load on the encoder DSP and will limit the total
image rate. (Network Client connections add load to the Intellex IP but do not
affect the loading on the encoder.)
Recommendations
• Mix fixed cameras and domes on each VideoEdge IP Encoder to reduce
the chances of simultaneous severe motion on all cameras connected to a
single encoder.
• Minimize the number of connections to each encoder and if multiple
connections are necessary reduce the resolution, rate, and quality on the
backup connections.
Comentarios a estos manuales