American Dynamics Intellex IP Manual de usuario descargar pdf (Pagina 8)

www.intransa.com

Managing the video data retention capacity on the CCTV DVR Upgrade from anywhere

on the attached IP network appears as follows, with a network data switch providing

access to multiple platforms including the Intellex DVR.

There are many network administration and management advantages of connecting in

this manner, including connectivity to multiple Intellex DVRs and other devices.

Intellex Upgrade Procedure Summary

Prior to upgrading, you will need to prepare:

• (1) Gigabit Network Interface Card (such as a Intel Pro/1000) that fits properly

into your DVR’s PCI slot, if required for your plans;

• Network Driver for the above NIC card;

• A download of the free, standard Microsoft iSCSI initiator from the Microsoft

web site;

• (1) IP address per storage system, (1) IP address per NIC on the DVR.

The following steps will be required to complete the Intellex upgrade process:

1 Depending on the bandwidth requirement of the system, you may need to install

one 'etwork Interface Adapter on each of your Intellex DVRs.

2 Install the Microsoft iSCSI initiator and identify the initiator’s assigned name per

DVR.

3 Configure the Intransa StarterBlock, and assign video retention capacity to the

Intellex DVRs.

4 Configure the Microsoft iSCSI initiator on each DVR to connect to the Intransa

StarterBlock system for access to the shared retention capacity.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Sin comentarios

American Dynamics Intellex IP Manual de usuario Pagina 8