
SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B
INSTALLATION AND SERVICE GUIDE
2 of 10
Important Safeguards
CAUTION: The housing is a pressurized
enclosure. As such, certain care is
required for the safe use of the product.
1. Inspect the housing upon opening the
box. Ensure it was not damaged
during shipping. Immediately replace
housings that have been cracked or
show signs of damage.
2. Always use safety goggles when
servicing the housing.
3. Never use an unregulated gas supply
to pressurize the housing. The valve
should be regulated with a maximum
of 10psi output.
4. PRESSURIZE USING DRY
NITROGEN GAS ONLY!
5. Periodically examine the housing and
structure to which it's attached. If any
wear is noticed, replace immediately.
Additional Safeguards
1. Read Instructions – Read all safety and
operating instructions before operating the unit.
2. Retain Instructions – Retain safety and
operating instructions for future reference.
3. Heed Warnings – Heed all warnings on the unit
and in the operating instructions.
4. Follow Instructions – Follow all operating and
user instructions.
5. Electrical Connections – Only a qualified
electrician should make electrical connections.
6. Attachments – Attachments not recommended
by the product manufacturer may cause
hazards.
7. Cable Runs – All cable runs must be within
permissible distance.
8. Mounting - This housing must be properly
secured to a supporting structure capable of
sustaining the weight of the unit. Accordingly:
a. The installation should be made by a
qualified installer and be in compliance with
local codes.
b. Select suitable installation hardware for the
mounting surface and weight of the unit and
periodically examine the housing and
supporting structure to ensure the integrity of
the installation. Otherwise, the housing could
separate from the support structure and fall,
causing damage or injury.
Unpacking
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an
item appears to have been damaged in shipment,
replace it properly in its carton and notify the
shipper.
Be sure to save:
1. The shipping carton and packaging material.
They are the safest material in which to make
future shipments of the equipment.
2. These instructions.
WARNING! TO REDUCE THE
RISK OF ELECTRICAL SHOCK,
DO NOT EXPOSE COMPONENTS
TO WATER OR MOISTURE.
Comentarios a estos manuales