DATA COMMUNICATIONS
The DATA COMMUNICATIONS menu defines the RS-232
port connections between the LOCAL Site and each
REMOTE Site in the satellite network.
• Use this menu at each satellite site to identify the RS-232
links between that site and other sites in the network.
REMOTE SITE - Indicates the REMOTE site being
configured. Every REMOTE site connected to the LOCAL
Site must be configured via this menu (see page 1-4). Identify
all remote sites connected, whether or not the site is a Source
or Receiving site.
LOCAL PORT - Identifies the RS-232 port of the LOCAL
AD1024 CPU that is connected to that REMOTE site.
The port communications parameters are set to default values
(baud rate = 1200, etc.). If any parameters changes are
required, use the Port menu, page 4-22, to change the values.
Do not change the port use, SATELLITE, from the Port menu.
The port use of SATELLITE is set by the LOCAL PORT field
of the DATA COMMUNICATIONS menu, above.
REMOTE PORT - Identifies the RS-232 port of the
REMOTE AD1024 CPU that is connected to this LOCAL
AD1024 CPU. This is an information field only.
PREVIOUS MENU - Returns to the Satellite Configuration
menu, page 4-33.
To configure REMOTE Site Data Communications.
1. Move the cursor to the REMOTE SITE line.
2. Enter the Site Number (1 - 16) of the REMOTE Site
being configured.
Note: DO NOT enter the Site Number of the LOCAL
Site (the LOCAL Site Number is specified via the
System Options menu, page 4-16, only).
3. Press the ENTRY key to move to the LOCAL PORT
line.
4. Identify the LOCAL AD1024 CPU PORT that the
specified REMOTE Site is connected to.
Press the ENTRY key to cycle the port numbers (1 - 10),
then press the NEXT key to lock in the selection and
move to the REMOTE PORT line.
or
Enter the port number (1 - 10) and press the ENTRY
key to save the number and move to the REMOTE
PORT line.
Note: The LOCAL PORT entry cannot be set to the port
number being used by the keyboard for menu
programming. The menu system skips that
number if the user cycles the port numbers, or
gives a warning tone if the user attempts to enter
the port number being used by the keyboard.
This entry automatically sets the Port Use (see Port
menu, page 4-22) of the selected port to SATELLITE.
5. Identify the port at the REMOTE Site that the LOCAL
PORT is connected to. (This is an information field
only.)
Press the ENTRY key to cycle the port numbers (1 - 10),
then press the NEXT key to lock in the selection.
or
Enter a port number (1 - 10) and press the ENTRY key
to save this port number.
6. Repeat the above steps for each REMOTE Site
connected to the LOCAL Site.
4-34
MENU PROGRAMMING AD1024
SATELLITE CONFIGURATION
1 DATA COMMUNICATIONS
2 VIDEO ASSIGNMENTS
RETURN MAIN
DATA COMMUNICATIONS
REMOTE SITE
LOCAL PORT
REMOTE PORT
PREVIOUS MENU
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales