LOCAL SATELLITE SYSTEM SETUP OVERVIEW
• SITE refers to a single AD1024 CPU in a satellite network and the resources that are directly connected and accessible to it.
Source Site - a satellite network site which provides video trunk outputs.
Receiving Site - a satellite network site which receives video trunk inputs.
• LOCAL refers to features that are accessible within a single Site by the keyboard attached to that Site’s AD1024 CPU.
• REMOTE refers to features that are accessible within one AD1024 Site by another AD1024 Site in a network.
For satellite operations, the following LOCAL setup procedures are required. Refer to page 1-4, Satellite System Operation, for
additional information on satellite system setup procedures.
1. Verify Satellite Site Connections
Before starting system setup, verify proper satellite system connections: RS-232 communications links for control commands
between sites, and Video Trunk lines for video transmission between sites. Typical satellite system connections are illustrated
on pages A-14 and A-15. Refer to the AD1024 Installation Manual, OP1024SA, for system connection procedures.
2. Identify THE LOCAL Site Number
At every site, use the System Options menu, page 4-16, to set the LOCAL Site Number, from 1 to 16.
3. Identify the LOCAL RS-232 Data communications links to other Sites
At every site, use the Data Communication menu, page 4-34, to define all RS-232 port data interfaces from the LOCAL Site
to each REMOTE Site.
Note: If any communications parameters for these RS-232 links must be changed, use the Ports menu, page 4-22.
4. Identify the LOCAL Video Trunk Inputs
At a Receiving Site (site which receives video trunk inputs), identify all video trunk line inputs from each REMOTE Site. Use
the Satellite Video Assignment menu, page 4-35, to define all REMOTE Site video trunk inputs.
In addition, use the Camera menu, page 4-21, to program a REMOTE site title for each video trunk input. This title is
displayed in the REMOTE On-Screen display, page 2-4. If the AD1024 Switching Bay is equipped with a Video Loss
Detector module, each video trunk input should also be set for SYNC ONLY loss detection via this Camera Title menu.
5. Set LOCAL Access Restrictions
Access restrictions must be placed on specific resources at the LOCAL site to prevent interference with satellite operations.
a. ACCESS RESTRICTIONS AT SOURCE SITE
At a Source Site (site which provides video trunk outputs), use the Keyboard/Monitor Access menu, page 4-25, to set
user access to the video trunk monitor outputs to “N” (access denied) for all LOCAL keyboards.
b. ACCESS RESTRICTIONS AT RECEIVING SITE
At a Receiving Site (site which receives video trunk inputs), use the Keyboard/Camera View Access menu, page 4-26, to
set user access to the video trunk camera inputs to “N” (access denied) for LOCAL keyboards.
At a Receiving Site, use the Keyboard/Remote Site Access menu, page 4-30, to set any desired restrictions for individual
LOCAL keyboard access to individual REMOTE Sites.
c. OPTIONAL LOCAL ACCESS RESTRICTIONS
In addition to the access restrictions above, set any desired optional restrictions at each site for individual LOCAL
keyboard, monitor, and camera access, using the Access menus, pages 4-24 to 4-30.
6. RECORD LOCAL SATELLITE SITE CONNECTIONS
Record all links between the LOCAL Site and all REMOTE sites that are connected to it, using the tables on page A-13.
A-12
APPENDIX AD1024
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales