NON-MENU PROGRAMMING
In most instances, the following non-menu setup descriptions
and commands are the same for all keyboards. Refer to the
appropriate operating manuals for the equivalent keyboard
commands.
Setup security is provided by a keyswitch on the keyboard
which disables all keyboard setup functions.
Before performing any of the following procedures make
sure the keyswitch is placed in the PROG position on the
AD2078A or in PROG mode for the ADTT.
System Reset
It may be necessary to clear all programmed information from
the AD2150 and reset the system to factory defaults.
CAUTION: THIS SYSTEM RESET ERASES ALL
USER-ENTERED DATA.
To reset the system to factory defaults:
1. Turn the keyswitch to PROG position (AD2078A) or enter
the PROG mode (ADTT).
2. Enter one of the following F2 code combinations:
“55, F2” (Enter the number 55, then press the F2 key.)
“99, F2” (Enter the number 99, then press the F2 key.)
There is a 3-second period after the “55, F2” command has
been entered in which the “99, F2” command must be entered.
If “99, F2” is not entered within the 3-second period, the
system does not reset.
Monitor Display Arrangement
The arrangement of the titles and time and date displays in the
monitor on-screen display is changed by entering F2 key
combinations from the keyboard.
To change the arrangement of the on-screen displays:
1. Call the desired monitor.
2. Turn the keyswitch to PROG position (AD2078A) or enter
the PROG mode (ADTT).
3. Enter one of the following F2 combinations:
“1 F2” Displays date and time on the monitor.
“2 F2” Removes the date and time display from the
monitor.
“3 F2” Displays camera title, camera number, and
camera status on the monitor.
“4 F2” Removes camera title, camera number, and
camera status from the monitor.
“5 F2” Displays titles and date and time at the top of the
monitor screen.
“6 F2” Displays titles and date and time at the bottom of
the monitor screen.
“7 F2” Displays titles and date and time on the monitor.
“8 F2” Removes titles and date and time from the
monitor.
4. Turn the keyswitch to the OFF position (AD2078A) or exit
the program mode (ADTT).
Monitor Display Positioning
A keyboard joystick adjusts the horizontal and vertical position
of the on-screen title display for each of the five monitor
outputs. This capability is enabled or disabled by F2 code
combinations.
The desired title display arrangement for each monitor should
be selected, above, before using this positioning procedure.
To adjust the positioning of the selected on-screen display:
1. Call the desired monitor.
2. Turn the keyswitch to PROG position (AD2078A) or enter
the PROG mode (ADTT).
3. Enter the code combination “50 F2” on the keyboard.
4. Hold the joystick in the direction to move the titles. The
title display continues to move until the joystick is centered.
5. When the title is positioned as desired, enter the code
combination “51 F2” on the keyboard. This disables the
use of the joystick for display positioning.
6. Turn the keyswitch to the OFF position (AD2078A) or exit
the program mode (ADTT).
3-2
NON-MENU PROGRAMMING
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales