American Dynamics RAS916LS-1 Especificaciones descargar pdf (Pagina 26)

SPEEDDOME ULTRA VII AND ULTRA VIIE CAMERA DOME 8200-0184-01, REV. E

INSTALLATION AND SERVICE GUIDE

26 of 38

Removing the Slot Covers

1. Gently swivel eyeball to totally expose one of

two slot covers (

Figure 26).

CAUTION: Swiveling fast can damage gears.

2. Insert small, thin-bladed screwdriver into space

between cover and eyeball.

3. Gently pry off slot cover.

4. Gently swivel eyeball to totally expose

remaining slot cover. With other cover removed,

this cover can be easily removed.

Figure 26. Removing slot covers

Removing the Camera

1. Perform procedure "Removing the Slot Covers"

(page

25).

2. Remove ribbon cable from camera (

Figure 27).

Swivel camera yoke to expose camera

connector. Then, using a small slotted

screwdriver, 1) gently pry camera connector

loose from camera, and 2) pull it down through

cable tie wrap.

Figure 27. Removing the ribbon cable

3. Remove camera (

Figure 28).

1) Loosen the screw holding the camera tripod

mount, then 2) carefully lift the camera out.

Figure 28. Removing the camera

4. Reverse steps to reassemble. Ensure ribbon

cable pins are inserted "face down".

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Sin comentarios

American Dynamics RAS916LS-1 Especificaciones Pagina 26