American Dynamics AD1981 Especificaciones descargar pdf (Pagina 13)

2-4 AD2079 Operator's Manual

display. The integer 1 signifies minimum brightness. The integer 8 signifies maximum

brightness. 8 is the factory default setting.

2. To change the currently displayed brightness level, cycle through the levels using the NEXT

or LAST keys to move in forward or reverse direction respectively. Each time the level

changes, the intensity of the displayed characters changes as well.

3. When the appropriate integer appears in the ENTER display, press the PROG key to save the

selection. You now have the option to either set the speaker volume level using the following

procedure, or exit setup mode by pressing the F1 key.

To Set the Speaker Volume

1. After LED brightness level selection has been completed, the message "SOUND" appears in

the CAMERA display. The speaker volume level ("Off" or integer values from 1 to 7) appears

in the ENTER display. "Off" indicates the speaker is disabled. The integer 1 signifies the

minimum volume level. The integer 7 signifies the maximum volume level. 7 is the factory

default setting.

2. To change the currently displayed volume level, cycle through the levels using the NEXT or

LAST keys to move in forward or reverse direction respectively. Each time the level changes,

a short tone sounds indicating the new level.

3. When the appropriate level appears in the ENTER display, press the PROG key to save the

selection. You now have the option to either set the PTZ motion control option using the

following procedure, or exit the setup mode by pressing the F1 key

To Set the Pan / Tilt / Zoom Motion Control Option

Depending on the particular switching system that is used with the AD2079 keyboard, the pan, tilt,

and zoom (PTZ) motions of the system cameras are controlled by one of two methods: Repeat or

Make/Break. Detailed descriptions of these two methods are beyond the scope of this manual, but a

system administrator will be advised of the appropriate method to use, and will make the

appropriate setting accordingly.

1. After speaker volume level selection has been completed, the letters "rpt =" appear in the

CAMERA display. "AUTO" will appear in the ENTER display. “AUTO” indicates that the

switching system being used will automatically select either the Repeat or Make/Break control

method.

2. You can step through the “AUTO”, "OFF" and "ON" states by using the NEXT or LAST

keys. If "OFF" is displayed, the Repeat method will be set off . If "ON" is displayed the

Repeat method will be set on. The AD168 system operates with Repeat set to OFF. American

Dynamics systems that operate with Repeat set to ON include AD1650B, AD2050, AD2052,

AD2150, and AD2350. Consult with your system administrator about the appropriate setting

for your system.

3. When the appropriate state appears in the ENTER display, press the PROG key to save the

selection. You now have the option to either set the baud rate using the procedure indicated on

page 2-3, or exit the setup mode by pressing the F1 key.

Resetting Keyboard Parameters

1. To reset baud rate, LED brightness level, speaker volume level, and the PTZ motion control

option to factory default settings, first unplug the keyboard's wall transformer.

2. Press and hold the F1 and PROG keys simultaneously while plugging the transformer back in.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Comentarios a estos manuales

Sin comentarios

American Dynamics AD1981 Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad American Dynamics AD1981