American Dynamics AD1981 Especificaciones descargar pdf (Pagina 27)

AD2079 Operator's Manual

4-2

There is also a pattern time limit. A single pattern cannot have a duration longer than 400 seconds.

How ever many commands have been issued, a pattern will stop recording once the time limit has

elapsed.

Note: pattern command sequences can vary depending on the switching system and

accessories used. Consult the appropriate product manual(s) if necessary. The following pattern

commands may not be compatible with your particular system requirements.

Defining Patterns

To define a pattern:

1. Turn the three-position keyswitch to the PROGRAM position.

2. Enter the pattern identification number on the numeric keypad (the number will appear in the

ENTER display).

3. Press the PATRN key (the ENTER display will show “P-1”, “P-2”, or “P-3”).

4. Press the PROG key. Using the joystick and lens keys, maneuver the called camera to define

the pattern.

5. Press the ACK key to save the pattern (the ENTER display will clear).

Clearing Patterns

To clear a pattern:

1. Turn the three-position keyswitch to the PROGRAM position.

2. Enter the identification number of a previously defined pattern on the numeric keypad (the

number will appear on the ENTER display).

3. Press the PATRN key (the ENTER display will show “P-1”, “P-2”, or “P-3”).

4. Press the CLEAR key to remove the pattern (the ENTER display will clear).

Arming a Monitor

When a monitor is armed, the camera video associated with an alarm for that monitor appears

when an alarm has been triggered. To arm a monitor, do the following:

1. Call the monitor to be armed (see Chapter 3).

2. Turn the three-position keyswitch to the PROGRAM position.

3. Enter the arming type identification number on the numeric keypad (the number will appear in

the ENTER display). Note: for information about arming types, consult the operating manual

for the switching system being used.

4. Press the ARM key. The ENTER key will clear, and the selected monitor screen displays the

arming type code for five seconds.

Disarming a Monitor

When a monitor is disarmed, the camera video from alarms is not displayed when an alarm has

been triggered. To disarm a monitor, do the following:

1. Call the monitor to be disarmed (see Chapter 3).

2. Turn the three-position keyswitch to the PROGRAM position.

3. Press the OFF key to disarm the called monitor.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

Sin comentarios

American Dynamics AD1981 Especificaciones Pagina 27