American Dynamics AD1981 Especificaciones descargar pdf (Pagina 20)

Using the AD2079 in Operate Mode

3-1

Chapter 3: Using the AD2079 in Operate Mode

This chapter describes how to call cameras to view on workstation monitors. It also explains how

to control the movement of pan/tilt cameras, and how to zoom, focus, and adjust the iris of a

camera lens. In addition, it explains procedures for acknowledging alarms, and controlling

auxiliary devices such as door locks and lights.

User Numbers and Passcodes

Depending on the setup of the switching system being used, an operator may have to enter a user

code and passcode on the AD2079 keyboard in order to gain system access. If a user code is

required, the letters “

” appear in the CAMERA display to prompt the operator. After entering

the appropriate user code, the operator is prompted by the letters “

PSC

” in the CAMERA display.

After entering the appropriate passcode, the operator has system access.

Consult with your system administrator to verify the appropriate user number and passcode for

your keyboard.

Logging On to the System

To log on to the system:

1. Enter your user code (assigned by the system administrator) on the numeric keypad

2. Press the ACK key

The system prompts for the user passcode by displaying "PSC" in the CAMERA display.

3. Enter the assigned passcode (maximum of six digits) on the numeric keypad.

If an incorrect passcode is entered, press the CLEAR key, and then repeat step 3.

4. Press the ACK key.

If the passcode is accepted, the CAMERA display window clears. This confirms that the keyboard

is communicating with the system, and that a monitor can be "called" to the keyboard.

Logging Off from the System

When a user shift is completed, it is advisable to log off from the keyboard to insure system

security.

To log off from the system:

1. Press the USER key. “UC” appears in the CAMERA display (log off is complete).

Selecting Monitors

Workstation monitors display the video from the cameras and domes installed in local and/or

satellite facilities. Each monitor has an identification number documented by the system

administrator.

To select a monitor:

1. Enter the monitor identification number on the numeric keypad (the number will appear in the

ENTER display).

2. Press the MONITOR key. (the monitor identification number will appear in the MONITOR

display window. The ENTER display will clear). This monitor has now been

called

to the

keyboard. Camera video can now be viewed on the called monitor.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Comentarios a estos manuales

Sin comentarios

American Dynamics AD1981 Especificaciones Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad American Dynamics AD1981