NON-MENU PROGRAMMING
The following non-menu setup programming functions are
accessible from AD2088 or AD2079 keyboards or the AD5500
or AD5400 Excalibur systems. All Non-Menu Programming
functions described in this section are LOCAL capabilities
only.
NOTE: The keyswitch must be in the Program (PROG)
position for all non-menu programming functions.
System Reset
It may be necessary to clear all programmed information from
the LOCAL AD1024 CPU, and reset the system to defaults.
CAUTION - THE FOLLOWING COMMANDS ERASE
ALL USER ENTERED DATA.
To clear and reset all LOCAL AD1024 programming:
1. Turn the keyswitch to PROG position.
2. Enter the following F2 code combination:
“55 F2” (Enter the number 55, then press the F2 key.)
3. Within three seconds, enter the following keyboard F2
code combination:
“99 F2” (Enter the number 99, then press the F2 key.)
There is a 3-second period after the “55 F2” command has
been entered in which the “99 F2” command must be entered.
If the “99 F2” is not entered within the 3-second period, the
system does not reset.
When this code is entered, the LOCAL AD1024 CPU clears
and resets all user programmed functions (Tours, Salvos,
Alarm Programming, Event Timers, etc.). This resets all
LOCAL AD1024 CPU programmed functions to the factory
default settings. See Appendix, page A-2, for default settings.
Setting the Day of the Week
The day of the week must be set prior to programming the
Event Timers, page 4-10. Day of the week can be set from the
keyboard, or via the Set Date and Time menu, page 4-4.
To set the LOCAL day of the week from the keyboard:
1. Turn the keyswitch to PROG position.
2. Enter one of the following F2 code combinations:
“61 F2” Sunday (SUN)
“62 F2” Monday (MON)
“63 F2” Tuesday (TUE)
“64 F2” Wednesday (WED)
“65 F2” Thursday (THR)
“66 F2” Friday (FRI)
“67 F2” Saturday (SAT)
“60 F2” Displays the current day of the week, for three
seconds, in the Status Line.
When any of these F2 codes is entered, the three-digit day
code, indicated in the parenthesis above, is displayed for three
seconds in the on-screen Status Line.
Setting Date Format
There are three options for the on-screen DATE display format.
Date format can be set by the following keyboard commands.
The default Date format is: MM-DD-YY.
To set the LOCAL date format from the keyboard:
1. Turn the keyswitch to PROG position.
2. Enter one of the following F2 code combinations:
“21 F2” MM-DD-YY
“22 F2” DD-MM-YY
“23 F2” YY-MM-DD
“24 F2” Toggles through the three date formats.
Date format, day of the week, and the current time and date
may be set from the Set Time and Date menu, page 4-4.
NON-MENU PROGRAMMING AD1024
3-2
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales