PROGRAMMING A SYSTEM TOUR
To select a System Tour for programming:
1. Move the cursor to the TOUR number line of the menu.
2. Enter the desired tour number (1 - 64) on the keypad.
3. Press the ENTER key.
See page 4-2 for cursor movement instructions.
CAM (Camera)
To add or change a camera in a tour:
1. Move the cursor to the CAM column and desired entry.
2. Enter the desired camera number (1 - 1024 for Real
numbers or 1 - 9999 for Pseudo numbers). If the CN
field is set to “S” or “T”, enter a Salvo or Tour number.
Note: If Pseudo numbers are used, CAM number switches
between Pseudo numbers when N or Y is selected, and
Real numbers when S or T is selected in the CN field.
3. Press the ENTER key.
To eliminate a camera from a tour, set the dwell time (DWL) in
the next column to zero (00) for the desired entry.
DWL (Dwell Time)
To set a dwell time for a camera in a tour:
1. Move the cursor to the DWL column and desired entry.
2. Enter the desired dwell time (from 1 to 60) in seconds.
* If 61 is entered, the camera will Hold at this tour entry.
* If 00 is entered, this entry is not called in the tour.
3. Press the ENTER key.
CAM and DWL Example: Set tour entry 5 to call camera
500, for a dwell time of 5 seconds; set tour entry 6 to call
System Salvo 24 for 20 seconds
SET SYSTEM TOURS
TOUR - 01
ENT CAM DWL PRE AUX CN
01 0001 02 00 0 - N
02 0002 02 00 0 - N
03 0003 02 00 0 - N
04 0004 02 00 0 - N
05 0500 05 00 0 - N
06 0024 20 00 0 - S
.
16 0016 02 00 0 - N
PREVIOUS MENU
If preset scenes, auxiliary actions, or connect next actions are
not required, repeat the preceding CAMERA and DWELL
TIME instructions for as many tour entries as desired.
PRE (Preset)
If a camera preset scene is desired for a tour entry:
If the CN field is set to “S” or “T”, do not enter a preset
scene for this entry.
1. Move the cursor to the PRE column and desired entry.
2. Enter the desired preset number (from 1 to 72). Zero (0)
represents no preset call for this entry.
3. Press the ENTER key.
AUX (Auxiliary)
If an auxiliary action is desired for a tour entry:
Note: If the CN field is set to “S” or “T”, do not enter an
auxiliary action selection.
1. Move the cursor to the AUX column and desired entry.
2. Press the ENTER key to cycle through the AUX options.
Press the NEXT key to accept the displayed selection.
or
Enter one of the following numbers and press the
ENTER key. The selection is displayed in the AUX
column.
1 = 1 ON 5 = 1 OFF
2 = 2 ON 6 = 2 OFF
3 = 3 ON 7 = 3 OFF
4 = 4 ON 8 = 0 - (no action)
PRE and AUX Examples: At tour entries 1 and 2, call preset
scenes and activate auxiliaries 1 and 2; at tour entries 4 and
5 call two other preset scenes and turn off both auxiliaries.
SET SYSTEM TOURS
TOUR - 01
ENT CAM DWL PRE AUX CN
01 0001 02 01 1 ON N
02 0002 02 02 2 ON N
03 0003 02 00 0 - N
04 0004 02 03 1 OFF N
05 0500 05 05 2 OFF N
06 0024 20 00 0 - S
.
16 0016 02 00 0 - N
PREVIOUS MENU
4-6
MENU PROGRAMMING AD1024
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales