VIDEO ASSIGNMENTS
The VIDEO ASSIGNMENTS menu defines the camera inputs
at the LOCAL receiving site which are used as inputs for the
video trunk links from each REMOTE source site. This
provides proper switching when REMOTE cameras are called
by LOCAL users.
• Use this menu at a Receiving Site to identify video trunk
line inputs from each REMOTE Site.
This menu has multiple pages, with 16 camera numbers per
page. See page 4-2 for menu paging instructions.
LOCAL CAM (Camera) - Identifies camera inputs at the
LOCAL site which are used for video trunk inputs from a
REMOTE Site. Camera inputs which are used for LOCAL
video camera inputs are shown as blank REM SITE and REM
MON fields in this menu.
REM SITE - Identifies the REMOTE site which provides the
video trunk inputs to this LOCAL CAM input. If no
REMOTE Site video trunk is connected to the LOCAL CAM
input, leave this entry blank.
REM MON - Identifies the monitor output from the
REMOTE site (REM SITE) which is connected to this
LOCAL CAM input. If no REMOTE Site video trunk is
connected to the LOCAL CAM input, leave this entry blank.
PREVIOUS MENU - Returns to the Satellite Configuration
menu, page 4-33.
To define the video trunk inputs to the LOCAL Site:
1. Move the cursor to the desired LOCAL CAM line to
select a LOCAL camera input for each video trunk input
to be configured.
2. Move the cursor to the REM SITE column for this input.
3. Enter a Site Number (1 - 16) of the REMOTE Site to be
identified for this LOCAL input.
Note: DO NOT enter the Site Number of the LOCAL Site
(the LOCAL Site Number is entered via the System
Options menu, page 4-16, only).
Remember to set the LOCAL Site Number via the System
Options menu, page 4-16.
4. Press the ENTRY key to save the REM SITE number.
5. Move the cursor to the REM MON column for the
selected LOCAL CAM input.
6. Enter the monitor output number that this video trunk
line is connected to at the REMOTE Site.
7. Press the ENTRY key to save the REM MON number.
Note: For all camera inputs at a LOCAL Site which are
used for LOCAL video inputs, DO NOT enter any REM
SITE or REM MON values. These entries must be left
blank in this menu.
For each LOCAL camera input assigned as a REMOTE video
trunk line input, a Camera Title should be programmed for the
REMOTE on-screen display, and if a VLD module is installed,
the camera input Video Loss should be set to SYNC ONLY.
Use the Camera Title menu, page 4-21 for these settings.
4-35
AD1024 MENU PROGRAMMING
SATELLITE CONFIGURATION
1 DATA COMMUNICATIONS
2 VIDEO ASSIGNMENTS
RETURN MAIN
VIDEO ASSIGNMENTS
LOCAL REM REM
CAM SITE MON
0001 - - - - -
0002 01 001
0003 01 002
0004 02 017
.
.
0016 02 128
PREVIOUS MENU
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales