SYSTEM OPTIONS
The SYSTEM OPTIONS menu is used to establish several
operating functions. Use this menu to enable or disable
operator identification passcode entry, to identify a particular
camera input for all programming menu display functions, to
establish the Site Number of the LOCAL Site for use in
satellite network communications (see page 1-4), and to enable
or disable the Peripheral Interface Port.
USER IDS
The USER IDS menu entry of the System Options menu
enables or disables the system Keyboard Passcode Entry
procedure. This procedure (page 2-2) allows only authorized
personnel to operate the system.
To enable or disable USER IDS (keyboard passcode entry):
1. Move the cursor to the USER IDS line.
2. Press the ENTER key to toggle the settings:
DISABLED for no user passcode.
ENABLED for yes user passcode.
3. Press the NEXT key to lock in the selection and move to
the next menu line.
The setting for USER IDS does not take effect until the user
exits the menu programming mode. Operator passcodes are
enabled only at the LOCAL level. Once the LOCAL
AD1024 Site allows access to the system, all REMOTE
systems on the network are available to that operator.
MENU CALLUP
The AD1024 on-screen menus are provided via a separate
video output, labeled PROG MON, on the rear of the AD1024
CPU. This video output may be connected back into the video
switching system at any camera input for display on the called
monitor. The Menu Callup field identifies the LOCAL camera
input that the AD1024 PROG MON video output is connected
to.
To set the Menu Callup camera number:
1. Move the cursor to the MENU CALLUP line.
2. Enter the camera number (1 - 1024) of the input that is
connected to the AD1024 PROG MON output.
3. Press the ENTER key to lock in the selection and move
to the next menu line.
When a Menu Callup camera input has been defined, whenever
menu programming is entered (page 4-2), the menu displays
will be shown on the called monitor. The system on-screen
display (page 2-3) is removed when the menus are displayed,
and is restored when the menus are exited.
SITE NUMBER
Each site in a satellite network must be assigned a separate Site
Number (see page 1-4). This Site Number is required for
addressing purposes when commands and data are transmitted
via the RS-232 interfaces between sites. The System Options
menu allows assigning a Site Number to the LOCAL Site
only. Each Site must be setup locally for its Site Number.
To set the Site Number for the LOCAL Site:
1. Move the cursor to the SITE NUMBER line.
2. Enter the LOCAL Site Number (1 to 16) on the keypad.
3. Press the ENTER key to lock in the entry.
PERIPHERAL INTERFACE
To enable or disable the Peripheral Interface Port:
1. Move the cursor to the Peripheral Interface line.
2. Press the ENTER key to toggle the settings:
PREVIOUS MENU - Returns to the SYSTEM Menu.
4-16
SYSTEM OPTIONS
USER IDS - DISABLED
MENU CALLUP - _ _ _ _ _
SITE NUMBER - _ _ _
PERIPHERAL INTERFACE - DISABLED
PREVIOUS MENU
MENU PROGRAMMING AD1024
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 SYSTEM OPTIONS
7 MONITOR STATUS
RETURN MAIN
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales