SET TIME AND DATE
Use the SET TIME AND DATE menu, below, to set the date
format, date, time, and day of the week for on-screen displays.
DATE FORMAT - Selects the system date format for display.
Note that the presentation of the date in the next menu line
(DATE) changes to correspond to the format selection.
1. Place the cursor on the DATE FORMAT line.
2. Press the ENTER key to cycle through each date format.
Press the NEXT key to accept the displayed selection.
or
Enter the number which corresponds to the desired
format and press the ENTER key.
1 = MM-DD-YY
2 = DD-MM-YY
3 = YY-MM-DD
DATE - Displays the date in the format selected (above).
1. Place the cursor on the DATE line.
2. Enter the first two digits of the date based on the format
selected and press the ENTER key.
3. Enter the second pair of digits based on the format
selected and press the ENTER key.
4. Enter the third pair of digits based on the format selected
and press the ENTER key.
Note: Pressing the ENTER key without entering a number
results in a “00” entry for that item.
Date Example: Using the MM-DD-YY format, enter the date
09-30-94.
Enter 09 on the keypad and press the ENTER key.
Enter 30 on the keypad and press the ENTER key.
Enter 94 on the keypad and press the ENTER key.
TIME - Displays the time, in 24-hour format, as HH:MM:SS
(hour:minute:second).
1. Place the cursor on the TIME line.
2. Enter the hour (HH) and press the ENTER key.
Note: Enter time in 24-hour format.
3. Enter the minutes (MM) and press the ENTER key.
4. Enter the seconds (SS) and press the ENTER key.
Time Example: Set the time to read 14:17:28.
Enter 14 on the keypad and press the ENTER key.
Enter 17 on the keypad and press the ENTER key.
Enter 28 on the keypad and press the ENTER key.
DAY OF WEEK - Displays the day of the week, SUN - SAT.
The day of the week must be set properly before programming
Event Timers, page 4-10.
1. Place the cursor on the DAY OF WEEK line.
2. Press the ENTER key to cycle through the days of the
week. Press the NEXT key to accept the displayed
selection.
or
Enter the number which corresponds to the desired day
of the week and press the ENTER key.
1 = SUN 4 = WED
2 = MON 5 = THR
3 = TUE 6 = FRI
7 = SAT
PREVIOUS MENU returns to the SYSTEM menu, page 4-3.
See page 4-2 for cursor movement instructions.
MENU PROGRAMMING AD1024
SET TIME AND DATE
DATE FORMAT - MM-DD-YY
DATE - 09-20-94
TIME - 16:57:26
DAY OF WEEK - TUE
PREVIOUS MENU
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 SYSTEM OPTIONS
7 MONITOR STATUS
RETURN MAIN
4-4
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales