KEYBOARD/CAMERA CONTROL
This defines the Keyboard-to-Camera control access which
prevents selected LOCAL keyboards from controlling camera
functions (Pan/Tilt/Lens) on selected LOCAL cameras. In this
menu it is the keyboard which controls what cameras can be
controlled. This feature only prevents control, it does not
prevent camera viewing. If access is denied, that camera can
be viewed, but can not be controlled from that keyboard.
Note: Any camera that is locked from viewing a keyboard, via
the Keyboard/Camera View menu, page 4-26, is also
locked from that keyboard for control access.
The Keyboard/Camera Control menu has multiple pages with
eight cameras per page vertically, and eight keyboards per page
horizontally. Refer to page 4-2 for menu paging instructions.
The codes for each entry in the menu are:
Y = keyboard has access privilege to control a camera
N = keyboard does not have access to control a camera
The above example menu indicates that:
• All the keyboards can control camera 1.
• Keyboards 1, 2, and 3 can not control camera 2.
• Only keyboards 1, 2, and 3 can control camera 3.
The Keyboard/Camera Control menu entries are set default to
Y, all keyboards have access privilege to control all cameras.
To change the control access to cameras from a keyboard:
1. Position the cursor to the monitor and keyboard location
that is to be changed.
2. Press the ENTER key. When the ENTER button is
pressed, the setting toggles between:
Y = control access from this keyboard.
N = no control access from this keyboard.
Note: To set control access to a camera from a keyboard
to Y, viewing access from that keyboard to that
camera must already be set to Y, page 4-26.
3. Repeat steps 1 and 2 for any additional changes desired.
4. Position the cursor at the PREVIOUS MENU line.
5. Press the ENTER key to return to the ACCESS Menu,
page 4-24.
If the user attempts to call a camera from a keyboard which has
no access (set to “N” via this menu) for this camera, the
message “NO CTRL” is displayed in the on-screen video
status line.
Satellite System Setup
In a satellite network, each camera video input which is used to
receive a video trunk line from a REMOTE Site should be set
to “N” (NO) viewing access for all LOCAL keyboards, via the
Keyboard/Camera View menu, page 4-26. This Camera View
lockout also prevents all keyboards from control access to the
video trunk inputs.
4-27
AD1024 MENU PROGRAMMING
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CTRL
4. MONITOR/CAMERA ACCESS
5. MONITOR/CONTACT ACCESS
6. KEYBOARD/REMOTE SITE
RETURN MAIN
KEYBOARD/CAMERA CTRL
KEYBOARDS
CAM 01 02 03 04 05 06 07 08
0001 YYYYYYYY
0002 NNNYYYYY
0003 YYYNNNNN
. YYYYYYYY
. YYYYYYYY
. YYYYYYYY
. YYYYYYYY
0016 YYYYYYYY
PREVIOUS MENU
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales