SET SYSTEM TOURS
The SYSTEM TOURS menu permits programming of 64
System Tours. Each tour includes 64 entries that are called in
sequence to a single monitor. Each entry contains a LOCAL
camera number, dwell time, optional preset camera scene,
optional auxiliary action, and salvo connect next selection.
The Set System Tours menu has four pages, with 16 entries per
page. Set System Tours is a LOCAL programming feature.
The tour being programmed is identified in the TOUR line of
the menu.
ENT (Entry) - The tour Entry number refers to the sequence
of the cameras displayed in the tour. Each tour entry is unique
and the same camera (with different dwell times, presets, etc.)
may be entered as many times as desired.
CAM (Camera) - This identifies the Camera associated with
each tour entry. If the CN field is an “S” or “T”, the tour entry
is associated with a System Salvo or another System Tour, and
the CAM number is a System Salvo or System Tour number.
DWL (Dwell Time) - The dwell time is the length of time the
camera is displayed on the monitor before switching to the
next tour entry. The dwell time may be from 1 to 60 seconds;
an entry of 61 will “HOLD” the current camera displayed.
PRE (Preset) - If the camera site is programmed for preset
scenes (see page 3-4) a preset scene, from 1 to 72, may be
specified for this tour entry. The preset scene specified is
called automatically when the camera associated with this
entry is called. If a preset is not desired, enter a zero in this
field.
AUX (Auxiliary) - If the camera site is equipped with a
Receiver that has Auxiliary relays, an auxiliary can be
activated automatically by this tour entry. The number and
type of auxiliary functions at a site depends on the options
installed in the camera Receiver. If no auxiliary is desired,
enter a zero in this field.
CN (Connect Next) - Connect Next selects the next tour entry
in the table for simultaneous callup to the next contiguous
monitor, thereby forming a “Scratch Pad” Salvo call. The
salvo simultaneously calls up a set of cameras to contiguous
monitors for the dwell time specified by the first camera entry.
A selection of Yes (“Y”), No (“N”), Salvo (“S”), or Tour (“T”)
can be chosen for Connect Next.
• If “Y” is selected, the Connect Next feature calls the next
tour entry to the next monitor; a Dwell Time cannot be
programmed for the next entry.
• If “N” is selected, the Connect Next feature is not initiated.
The next entry in the table is selected for the called monitor
after the specified dwell time.
• If “S” is selected, a pre-programmed System Salvo is called.
The System Salvo number is specified in the CAM entry.
• If “T” is selected, another System Tour is called. The
System Tour number is specified in the CAM entry.
The Tour within a Tour feature (the selection of “T”) links
the desired number of tours together. It is recommended that
the last entry in a tour be used to call the next desired tour.
Note: A tour cannot call itself.
PREVIOUS MENU - Returns to the SYSTEM menu.
4-5
AD1024 MENU PROGRAMMING
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 SYSTEM OPTIONS
7 MONITOR STATUS
RETURN MAIN
SET SYSTEM TOURS
TOUR - 01
ENT CAM DWL PRE AUX CN
01 0001 02 01 1 ON N
02 0002 02 02 2 ON N
03 0003 02 03 3 ON N
04 0004 02 04 4 ON N
05 0005 02 05 1 OFF N
06 0006 02 06 2 OFF N
07 0007 02 07 3 OFF N
08 0008 02 08 0 N
.
.
64 0064 02 01 1 ON N
PREVIOUS MENU
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales