KEYBOARD/CAMERA VIEW
This menu defines the Keyboard-to-Camera viewing access,
which prevents selected LOCAL keyboards from calling up
selected LOCAL cameras for viewing on any monitor. This
also prevents control of the selected camera from that
keyboard. In this menu it is the keyboard which controls what
can be viewed on a monitor.
This Camera View lockout also prevents all keyboards from
control access (page 4-27) to the video trunk inputs.
The Keyboard/Camera View menu has multiple pages with
eight cameras per page vertically, and eight keyboards per page
horizontally. Refer to page 4-2 for menu paging instructions.
The codes for each entry in the menu are:
Y = keyboard has access privilege to view a camera
N = keyboard does not have access to view a camera
The above example menu indicates that:
• All keyboards have access to call camera 1.
• Keyboards 1, 2, and 3 can not call camera 2.
• Only keyboards 1, 2, and 3 can call camera 3.
The Keyboard/Camera View menu entries are set default to Y,
all keyboards have access privilege to to view all cameras.
To change the viewing access to cameras from a keyboard:
1. Position the cursor to the camera and keyboard location
that is to be changed.
2. Press the ENTER key. When the ENTER button is
pressed, the setting toggles between:
Y = call access from this keyboard.
N = no access from this keyboard.
Note: To set viewing access to a camera from a keyboard
to N, control access from that keyboard to that
camera must already be set to N, page 4-27.
3. Repeat steps 1 and 2 for any additional changes desired.
4. Position the cursor at the PREVIOUS MENU line.
5. Press the ENTER key to return to the ACCESS Menu,
page 4-24.
Cameras that do not have viewing access from a keyboard
should not be placed in a System Tour (set to “N” via this
menu). If the keyboard calls a System Tour that contains a
camera that is intended to be “locked out” from that keyboard,
it will be viewed during the System Tour.
Satellite System Setup
At a Receiving Site in a satellite network, each LOCAL
camera input which is used as a REMOTE video trunk input
provides REMOTE camera video input only. (LOCAL camera
inputs assigned as video trunk inputs are identified in the
Satellite Video Assignment menu, page 4-35.) Each such input
should be locked out (set to NO access) to prevent inadvertent
attempts to control a non-existent LOCAL camera.
Note: Certain keyboards (e.g., supervisor or maintenance
users) may need access to confirm availability of video
trunk camera inputs. For these, set to access allowed.
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CTRL
4. MONITOR/CAMERA ACCESS
5. MONITOR/CONTACT ACCESS
6. KEYBOARD/REMOTE SITE
RETURN MAIN
KEYBOARD/CAMERA VIEW
KEYBOARDS
CAM 01 02 03 04 05 06 07 08
0001 YYYYYYYY
0002 NNNYYYYY
0003 YYYNNNNN
. YYYYYYYY
. YYYYYYYY
. YYYYYYYY
. YYYYYYYY
0016 YYYYYYYY
PREVIOUS MENU
4-26
MENU PROGRAMMING AD1024
(96 paginas)
(264 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales