American Dynamics AD1650B Instrucciones de operaciones descargar pdf (Pagina 29)

CN (Connect Next)

If a salvo or tour switching is desired at a tour entry:

1. Move the cursor to the CN column and desired entry line.

2. Press the ACK key to cycle through the CN selections.

Press the NEXT key to accept the displayed selection.

Enter one of the following numbers and press the ACK key.

The selection is displayed in the CN column entry.

1 = N, no connect next

2 = Y, connect to the next entry

3 = S, call a System Salvo

4 = T, call another System Tour

If No (N) is selected, the CAM number for this entry is called

at this point of the tour sequence.

If Connect Next (Y) is selected, a camera salvo group is called

at this entry of the tour sequence. All contiguous entries in the

salvo group must be set to Y, except the last entry which is set

to N or S. The dwell time for every entry of the group is

controlled by the first entry of the group; the dwell time for all

other entries in the salvo group may be left blank.

If System Salvo (S) is selected, the CAM number for this entry

must be set to the desired System Salvo number. This System

Salvo is called at this entry of the tour sequence.

If another System Tour (T) is selected, the CAM number for

this entry must be set to the desired System Tour number to

call. It is recommended that the last entry in a tour be used to

call another tour (see CN Tour Linking Notes, next column).

A System Tour cannot call itself.

Note: If Pseudo numbers are assigned, the Camera (CAM)

field switches between Pseudo numbers when N or Y is

selected, and Real numbers when S or T is selected.

CN Examples: Create a salvo group of entries 3, 4, and 5; at

entry 8, link this tour to System Tour 11.

SET SYSTEM TOURS

TOUR - 01

ENT CAM DWL PRE AUX CN

01 001 02 01 1 ON N

02 002 02 02 2 ON N

03 003 10 00 0 - Y

04 004 00 03 1 OFF Y

05 100 00 05 2 OFF N

06 024 05 00 0 - S

07 007 02 00 0 - N

08 011 02 00 0 - T

PREVIOUS MENU

RUNNING A SYSTEM TOUR

To call a System Tour from a keyboard:

1. Select (Call) the monitor to run a tour on.

2. Enter the System Tour number (1 - 64) on the keypad.

3. Press the keyboard RUN key.

4. Press the ACK key within three seconds.

The keyboard HOLD key, or a dwell time of 61, stops (Holds)

the tour on the current camera. When a tour is on Hold, press

the keyboard RUN key to continue the tour.

The keyboard NEXT key is used to set and change the running

direction of a tour on Hold. To set the direction of the tour,

enter one of the following key combinations:

1 - NEXT - Sets a tour in forward direction.

2 - NEXT - Sets a tour in reverse direction.

NEXT - Steps to the next camera of the tour and sets the

tour to forward direction.

LAST (AD2078 keyboard) - Steps back to the prior camera

of the tour and sets the tour to reverse.

When running a tour in the forward direction, an

“

F” is

displayed in the on-screen Status Line beside the dwell time.

Conversely, when running a tour in the reverse direction, an

“R” is displayed on the screen.

Refer to page 2-5 for description of tour operating procedures.

To automatically run a System Tour based on time and day of

the week, refer to the SET EVENT TIMERS menu, page 4-10.

CN TOUR LINKING NOTES:

* When a tour calls another System Tour, any tour entries

defined following the CN entry of T (in the first tour) are

not called up.

* When a tour calls another System Tour, the sequence does

not automatically return to the original tour unless

specified by a CN entry of T in the tour being called.

* When a tour is running in the reverse direction, tour

linking may not operate as expected. The tour being

called by a T CN link starts operating in reverse, at the

last entry of that tour. Thus, if the tour being called also

has a CN link to another System Tour, that link is executed

first, and the rest of that tour is not run.

4-7

AD1650B MENU PROGRAMMING

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Comentarios a estos manuales

Sin comentarios

American Dynamics AD1650B Instrucciones de operaciones Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad American Dynamics AD1650B