KEYBOARD/CAMERA CONTROL
This menu defines the Keyboard-to-Camera control access
which prevents selected keyboards from controlling remote
functions on selected cameras. This feature only prevents
control, it does not prevent camera viewing. (Any camera that
is locked from a keyboard would also be, by default, locked
from that keyboard for control.)
Two-Wire Keyboards
For the two-wire keyboards, the following menu is displayed.
This display has 16 pages, with eight cameras per page. Refer
to page 4-3 for menu paging instructions.
The above example menu indicates that:
• All the keyboards can control (Y) camera 1.
• Keyboards 1, 2, and 3 cannot control (N) camera 2.
• Only keyboards 1, 2, and 3 can control (Y) camera 3.
To change the control access of cameras from a keyboard:
1. Position the cursor to the camera and keyboard entry.
2. Press the ACK key. When the ACK key is pressed the
setting toggles between: Y = control access from this
keyboard, N = no control access at the cursor location.
3. Repeat steps 1 and 2 for any additional changes desired.
Position the cursor at the PREVIOUS MENU line and press
the ACK key to return to the main ACCESS Menu, page 4-22.
RS-232 Keyboards
For the RS-232 keyboards, the following menu is displayed.
This display has 16 pages, with eight cameras per page. Refer
to page 4-3 for menu paging instructions. Refer to page 4-22
for keyboard numbering.
The above example menu indicates that:
• All keyboards can control (Y) camera 1.
• Keyboards 1a, 1b, 1c, 1d, and 2a cannot control (N) camera
2.
• Only keyboards 1a, 1b, and 1c can control (Y) camera 3.
To change the control access of cameras from a keyboard:
1. Position the cursor to the camera and keyboard entry.
2. Press the ACK key. When the ACK button is pressed, the
setting toggles between: Y = control access from this
keyboard, N = no control access at the cursor location.
3. Repeat steps 1 and 2 for any additional changes desired.
Position the cursor at the PREVIOUS MENU line and press
the ACK key to return to the main ACCESS Menu, page 4-22.
Port Expander Notes: If a port expander is used, configure
columns "a", "b", "c", and "d" for each keyboard attached
to the corresponding RS-232 port (1-4). If a port expander
is not used, configure only column "a" for that port.
4-25
AD1650B MENU PROGRAMMING
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CONTROL
4. MONITOR/CAMERA ACCESS
5. MONITOR/CONTACT ACCESS
RETURN MAIN
KEYBOARD/CAMERA CTRL
TWO-WIRE
CAM1234 5678
001 Y Y Y Y Y Y Y Y
002 N N N Y Y Y Y Y
003 Y Y Y N N N N N
004 Y Y Y Y Y Y Y Y
005 Y Y Y Y Y Y Y Y
006 Y Y Y Y Y Y Y Y
007 Y Y Y Y Y Y Y Y
008 Y Y Y Y Y Y Y Y
PREVIOUS MENU
KEYBOARD/CAMERA CTRL
RS-232 1234
CAM abcd abcd abcd abcd
001 YYYY YYYY YYYY YYYY
002 NNNN NYYY YYYY YYYY
003 YYYN NNNN NNNN NNNN
004 YYYY YYYY YYYY YYYY
005 YYYY YYYY YYYY YYYY
006 YYYY YYYY YYYY YYYY
007 YYYY YYYY YYYY YYYY
008 YYYY YYYY YYYY YYYY
PREVIOUS MENU
(26 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales