SET USER
If USER IDs is enabled, the SET USER menu is used to set a
priority level and passcode for each of 48 users. Each priority
level is defined through the SET PRIORITY menu, page 4-30.
Define the User to be selected:
1. Place the cursor at the USER line.
2. Enter the user number (1 - 48) to be defined.
3. Press the ACK key to accept the user number and move to
the next menu line, PRIORITY LEVEL.
To set a user priority:
1. Enter a priority number from 1 (lowest priority) to 8
(highest priority). A user with higher priority can capture
control of cameras from users with lower priority levels.
2. Press the ACK key to accept the priority level and move to
the next menu line, PASSCODE.
To set a passcode:
1. Enter a maximum of six digits at the keyboard.
2. Press the ACK key. The system then prompts to verify the
passcode by displaying “VERIFY PASSCODE”.
3. Re-enter the same six-digit code.
4. Press the ACK key.
5. If the verification code is not the same as the original one
entered, the following error message is displayed on the
menu: **ERROR - REENTER PASSCODE**. Go back
and repeat steps 1 through 4.
6. If the verification code does verify, the cursor is placed at
the PREVIOUS MENU line.
PREVIOUS MENU - Returns to the PRIORITY menu.
SET KEYBOARD
If USER IDs is disabled, the SET KEYBOARD menu is used
to set a priority level for each of the 16 RS-232 keyboards.
Each priority level is defined through the SET PRIORITY
menu, page 4-30.
Select the keyboard to be setup:
1. Place the cursor at the KEYBOARD line.
2. Press the ACK key to cycle through the list of available
keyboard numbers (1a, 1b, 1c, etc., through 4d), until the
desired keyboard number is shown. Press the NEXT key to
accept the displayed selection.
or
Enter the number which corresponds to the desired
keyboard and press the ACK key. These numbers are:
Enter number for Keyboard numbers
1 thru 4 1a thru 1d
5 thru 8 2a thru 2d
7 thru 12 3a thru 3d
13 thru 16 4a thru 4d
To set a keyboard priority:
1. Enter a number from 1 (lowest priority) to 8 (highest
priority). A keyboard of higher priority can capture control
of cameras from keyboards with lower priority levels.
2. Press the ACK key to lock in the priority level and move to
the PREVIOUS MENU line.
Note: All keyboards default to level “8” priority.
PREVIOUS MENU - Returns to the PRIORITY menu.
4-29
SET USER
USER # - 01
PRIORITY LEVEL: 8
PASSCODE
XXXXXX
PREVIOUS MENU
PRIORITY
1 USER IDENTIFICATION
2 SET KEYBOARD
3 SET PRIORITY
RETURN MAIN
AD1650B MENU PROGRAMMING
SET KEYBOARD
KEYBOARD - 01
PRIORITY LEVEL: 8
PREVIOUS MENU
PRIORITY
1 USER IDENTIFICATION
2 SET USER
3 SET PRIORITY
RETURN MAIN
(26 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales