KEYBOARD/MONITOR
The KEYBOARD/MONITOR menu defines the Keyboard-to-
Monitor access which prevents selected keyboards from
calling selected monitors. The codes for each monitor entry in
the menu displays are:
Y = keyboard has access privilege to monitor.
N = keyboard does not have access to monitor.
RS-232 Keyboards
For RS-232 keyboards, the following menu is displayed. This
display has two pages, with eight monitors per page. Refer to
page 4-3 for menu paging instructions. Refer to page 4-22 for
keyboard numbering used in these menus.
The above example menu indicates that:
• All keyboards can call (Y) monitor 1.
• Keyboards 1a, 1b, 1c, 1d, and 2a cannot call (N) monitor 2.
• Only keyboards 1a, 1b, and 1c can call (Y) monitor 3.
The Keyboard/Monitor menu entries are set default to Y, all
keyboards have access privilege to all monitors.
To change the access to a monitor from any RS-232 keyboard:
1. Position the cursor to the monitor and keyboard location
that is to be changed.
2. Press the ACK key. Each time the ACK key is pressed the
menu setting toggles between:
Y = this keyboard can call this monitor.
N = no access to this monitor from this keyboard.
3. Repeat steps 1 and 2 for any additional changes desired.
Position the cursor at the PREVIOUS MENU line and press
the ACK key to return to the main ACCESS Menu, page 4-22.
Port Expander Notes: If a port expander is used, configure
columns "a", "b", "c", and "d" for each keyboard attached
to the corresponding RS-232 port (1-4). If a port expander
is not used, configure only column "a" for that port.
Two-Wire Keyboards
For two-wire keyboards, no menu is provided. Keyboard
access to the system monitors is controlled by the keyboard
ports on the rear panel of the AD1650B. Eight two-wire
keyboard ports are provided. The port number on the rear
panel, labeled 1 - 8, corresponds to the monitor number
controlled via that port. Two types of keyboards are available
for connection to these ports:
AD1672A - a two-monitor keyboard. This keyboard has
two connection cables and may be connected to any two of
the ports to control the corresponding numbered monitors.
AD1678C - a system keyboard. It may be connected to any
2-wire port to control eight monitors, 1 - 8.
4-23
AD1650B MENU PROGRAMMING
ACCESS
1. KEYBOARD/MONITOR
2. KEYBOARD/CAMERA VIEW
3. KEYBOARD/CAMERA CONTROL
4. MONITOR/CAMERA ACCESS
5. MONITOR/CONTACT ACCESS
RETURN MAIN
KEYBOARD/MONITOR
RS-232 1234
MON abcd abcd abcd abcd
01 YYYY YYYY YYYY YYYY
02 NNNN NYYY YYYY YYYY
03 YYYN NNNN NNNN NNNN
04 YYYY YYYY YYYY YYYY
05 YYYY YYYY YYYY YYYY
06 YYYY YYYY YYYY YYYY
07 YYYY YYYY YYYY YYYY
08 YYYY YYYY YYYY YYYY
PREVIOUS MENU
(26 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales