ON-SCREEN STATUS LINE DISPLAYS
Setup/Programming
The following messages appear in the monitor on-screen Status
Line during certain non-menu programming functions.
SUN, MON, TUE, WED, THR, FRI, SAT - Displayed
during setup of Day of the Week, page 3-2. The
appropriate code is displayed after the day selection is
made.
DELTD - Displayed during Monitor Tour programming, page
3-4. This message indicates that a tour entry was just
deleted by the “0 - PROG” action.
TR CLR - Displayed during Monitor Tour programming,
page 3-4. This message indicates that the Monitor Tour
was just completely erased by the “62 - PROG” action.
nnnnE - Displayed during Contact Arming, page 3-6. This
message indicates the alarm contact number and the letter
“E” for alarm contact enabled.
nnnnD - Displayed during Contact Disarming, page 3-6. This
message indicates the alarm contact number and the letter
“D” for alarm contact disabled.
SSI, SSA, SSMA, SHI, SHA, SHMA, BSI, BSA, BSMA,
BHI, BHA, BHMA, DHI, DSI, DHA, DSA, DHMA,
DSMA, DIS - Displayed during Monitor Arming, page 3-5.
The message code indicates the Arming Code that the
monitor is armed for. See Appendix pages C and D for
descriptions of these codes.
UF4Wa - Displayed following entry of the “70 F2” code
combination on the keyboard. This message displays the
current software version number as the last three digits of
the message (e.g., “UF4W4” is version 4 of the embedded
AD1650B software).
Operation
The following messages appear in the monitor on-screen Status
Line during normal AD1650B operation.
nnF - Displayed during running a System Tour, page 2-5. The
message shows the dwell time of the currently displayed
camera, and the letter “F” for a tour running in Forward
direction.
nnR - Displayed during running a System Tour, page 2-5.
The message shows the dwell time of the currently
displayed camera, and the letter “R” for a tour running in
Reverse direction.
HOLD - Displayed during running a Tour, page 2-5. The
message indicates that the tour is on hold at the displayed
camera.
SALVO - Displayed during a System Salvo, page 2-6. The
message indicates that a System Salvo has been called to
this monitor.
LOCK - Displayed under the following conditions:
1. When the displayed camera has been Locked Out by
another keyboard, page 3-3. This camera cannot be
controlled by a user when the message is displayed.
2. When another keyboard is controlling pan/tilt, lens,
presets, or auxiliaries of the same camera, these
functions are temporarily not available and this message
is displayed in the on-screen Status Line, page 2-3.
This lockout lasts for two seconds after the conflicting
control action stops.
ALARM - Displayed when an armed alarm contact is
activated. This message remains until the alarm contact is
deactivated or the alarm is manually acknowledged,
depending on the alarm clearance mode of the monitor.
ACK nn - displayed when the operator presses the ACK key
to start a System Tour, page 2-5. This message indicates
the System Tour number selected, and is displayed until the
first camera of the tour is called to the monitor.
APPENDIX AD1650B
A-8
(26 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales